news:


DIAGPROG4 – UPDATE 2018 – NEW SOFTWARE: BMW CAS2+CAS3 OBDII, PEUGEOT, CITROEN, SUBARU, RENAULT, ISUZU!!!

2018-01-10

'dvd.png'

We have released new software update for following car models:

PSA BSI UDS - Continental Q04/Q05 software 121.62 - 131.81 - Program nr 83

Software for programming :

- KM - programming kilometers by OBDII

- Service - resetting service inspection by OBDII

- Erase fault history - erasing history of faults (DTC's) in all car modules by OBDII

- Read EEPROM - reading full memory BSI (available only to clients who bought data editing, option 802) by OBDII

- Write EEPROM - writing full memory BSI (availabe only to clients who bought data editing, option 802) by OBDII

- Erase DTC's - erase by OBDII

- Read PIN by OBDII

- Key Learning by OBDII

- Programming PIN by OBDII

- Virgin - Resetting BSI to Virgin State (to state like new BSI ordered) by OBDII

For more detailed information on UPDATE 2018, please contact the appropriate dealer or ElproSys representative directly.

 

Also we released Free software updates for following cars:

Isuzu KB (Bakkie) – 2017 - 93C66 - programming

 

Also we released NEW software updates for following cars:

Subaru Outback, Legacy (D70F3529) - 2017 - programming via OBDII - new software version

Captur , Clio IV , Opel Vivaro II , Fiat Talento - 2017 - programming via OBDII - new software version

BMW CAS3,CAS3+ - programming via OBDII - new software version

MINI CAS3,CAS3+ - programming via OBDII - new software version

Renault Twingo III (MB96F696RB) - programming via OBDII - new software version

Honda with MB91F061BS - new flash files added to server DataBase

Honda with MB91F062BS - new flash files added to server DataBase

PSA BSI UDS Continental - new flash files added to server DataBase

 

*ATTENTION:  Above programs are only available as a part of Update 2018 for DiagProg4 Diagnostic tool for cars.




DIAGPROG4 – UPDATE 2018 – NEW SOFTWARE: MASERATI, MERCEDES, CHERY, SKODA!!!

2017-12-13

'dvd.png'

We have released new software update for following car models:

Maserati Levante 2016, 2017 - programming  via OBDII

Maserati Ghibli (95320RT) 2017 - programming  via OBDII – Program nr 57

Chery Tiggo 5 9S12XHY256 - programming  – Program nr 67

For more detailed information on UPDATE 2018, please contact the appropriate dealer or ElproSys representative directly.


Also we released additional software updates for following cars:
Kia, Hyundai airbag Autoliv MAC7242 - read/write EEPROM via OBDII – Program nr 211

Mazda airbag XC2361 - read/write EEPROM via OBDII – Program nr 212

Nissan airbag XC2336 - read/write EEPROM via OBDII – Program nr 213

Dacia airbag Continental SPC560 - erasing crash data via OBDII – Program nr 214

Renault airbag Autoliv XC2236 - erasing crash data via OBDII – Program nr 215


* Additional programs are not included in Update UPDATE 2018 / FULL Package - they are available independently.


Also we released FREE software updates for following cars:
Skoda Kodiaq - programming  via OBDII

Also we released NEW software updates for following cars:
Jaguar, Land Rover with D70F352? - 2017 - programming via OBDII - new software version

Mercedes W204, W207, X204 , W212, W218 , W197 - (resolve problem with EZS value 559240) - programming via OBDII - new software version
Hyundai i10 9S12HY64 - programming - new software version

Mercedes SLK R171, ML W164, R W251, GL X164 - programming via OBDII/D31 - new software version

Renault Megane 4, Talisman, Trafic III, Scenic IV - ESC ATE Controller with UDS - programming via OBDII - new software version,

Renault Latitude, Fluence, SCALA, SCENIC III, LAGUNA III, MEGANE III:
ABS ATE Controller ABS with KWP2000
ABS ATE Controller (CDC/ADAM) with KWP2000
ESP ATE Controller (CDC/ESP) with KWP2000 - programming via OBDII - new software version,

Dacia Duster, Dokker, Sandero II:
ABS ATE Controller ABS with KWP2000
ABS ATE Controller (CDC/ADAM) with KWP2000
ESP ATE Controller (CDC/ESP) with KWP2000 - programming via OBDII - new software version.


*ATTENTION:  Above programs are only available as a part of Update 2018 for DiagProg4 Diagnostic tool for cars.


NEW - CANGATEWAY SMART – BMW – G SERIES – NOW AVAILABLE FOR SALE!!!

2017-12-12

'CAN_BMW_1.png'

We would like yto invite all clients to purchase new, innovative device CANGATEWAY SMART that is intended for following car models:

 

 

 

CanGateway Smart – BMW – G SERIES

CanGateway Smart is intended for research and development purposes only (off road) – it allows you to perform tests on vehicles under laboratory /  testing conditions as well as various vehicle tests and measurements on a chassis dynamometer.

CanGateway Smart device prevents from recording the number of kilometres/mileage of the vehicle while performing tests on a vehicle.

The main advantages of the CanGateway Smart device are easy and quick installation as well as ease of use.

CanGateway Smart comes with dedicated plug and cable to connect to a vehicle and is ready for installation.

 

For more detailed information on Cangateway SMART and in order to purchase this device, please contact the appropriate dealer or ElproSys representative directly.

DIAGPROG4 – UPDATE 2018 – NEW SOFTWARE: FORD, DODGE, MAZDA, FIAT!!!

December,2017

'dvd.png'

We have released new software update for following car models:

FORD F?50 2017 with 4" TFT display (Denso) - programming  via OBDII  Program nr 899*

*Program 899 requires purchase of program number 325

 

Dodge Viper 2013 - 2017 - programming  via OBDII  Program nr 77

 

For more detailed information on UPDATE 2018, please contact the appropriate dealer or ElproSys representative directly.

 

Also we released FREE software updates for following cars:

Mazda MX-5 2016 - programming  via OBDII

Fiat 124 Spider 2016 - programming  via OBDII

 

Also we released NEW software updates for following cars:

Ford Ranger 2016 with SPC5645S (Denso) - programming  via OBDII - new software version

Alfa 4C - programming  via OBDII - new software version

*ATTENTION:  Above programs are only available as a part of Update 2018 for DiagProg4 Diagnostic tool for cars. These programs are not available for DiagProg3 tester.

DIAGPROG4 – UPDATE 2018 – NEW SOFTWARE: FORD, LAND ROVER, WORKHORSE, HYUNDAI!!!

2017-12

We have released new software update for following car models:

Ford Ranger 2016 with SPC5645S (Denso) - programming  via OBDII  Program nr 897*

*Program 897 requires purchase of program number 325

Land Rover Velar 2018 with FULL TFT display - programming  via OBDII  Program nr 898*

*Program 898 requires purchase of program number 325 

Workhorse Custom Chassis P42 - 95160 - programming - Program nr 3065

 

For more detailed information on UPDATE 2018, please contact the appropriate dealer or ElproSys representative directly.

 

Also we released FREE software updates for following cars:

Hyundai IONIQ 2017 with MB91F061BS - programming  via OBDII

 

Also we released NEW software updates for following cars:

Fiat Mobi 2017 - Magneti Marelli - programming via OBDII - new software version

Suzuki Jimny 2016 with MB91F061BS - programming via OBDII - new software version

Honda 2016 with MB91F061BS - new flash files added to server DataBase

Dacia Duster, Logan, Logan MCV, Dokker, Lodgy, Sandero II - Instrument Cluster + ABS – programming via OBDII - new software version

Fiat 500X 2017 Magneti Marelli - programming via OBDII - new software version

*ATTENTION:  Above programs are only available as a part of Update 2018 for DiagProg4 Diagnostic tool for cars. These programs are not available for DiagProg3 tester.

DIAGPROG4 – UPDATE 2018 – NEW SOFTWARE: RENAULT, DACIA, HONDA, FORD!!!

2017-

 We have released new software update for following car models:

Renault Megane 4, Talisman, Trafic III, Scenic IV - ESC ATE Controller with UDS,

Renault Latitude, Fluence, Scala, Scenic III, Laguna III, Megane III:

ABS ATE Controller ABS with KWP2000,

ABS ATE Controller (CDC/ADAM) with KWP2000,

ESP ATE Controller (CDC/ESP) with KWP2000,

 

Dacia Duster, Dokker, Sandero II:

ABS ATE Controller ABS with KWP2000,

ABS ATE Controller (CDC/ADAM) with KWP2000,

ESP ATE Controller (CDC/ESP) with KWP2000.

 

- KM – programming kilometers in modules: ABS, ESP, ESC via OBDII  Program number 64

- READ EEPROM –  reading full ABS, ESP, ESC memory (available only for clients who bought data editing, option 802) via OBDII

- WRITE EEPROM – writing full ABS, ESP, ESC memory (available only to clients who bought data editing, option 802) via OBDII

 

For more detailed information on UPDATE 2018, please contact the appropriate dealer or ElproSys representative directly.

Also we released FREE software for following cars:

Ford Fusion Hybrid (Denso) 2017 - programming  via OBDII

MAN Tge -2017- programming via OBDII

VW Crafter (7C) - programming via OBDII

Seat Toledo Mk4 from 06/2015 - programming via OBDII

 

Also we released NEW software for following cars:

Renault Duster, Logan, Sandero II - 2017- Instrument Cluster - programming via - new software version

Ford Transit 2017 (JCI) with D70F3525 - programming mileage via OBDII- software for cars with odometer memory only in Instrument Panel Cluster (IPC) - new software version

Ford F250, F450 – 2014 - with 4" TFT and MB91F038+YGV639 (Denso) - programming mileage , motohours and idle motohours via OBDII - new software versions

Renault Captur , Clio IV , Opel Vivaro II , Fiat Talento 2017  - programming mileage via OBDII - new software version

Honda 2016 with MB91F061BS - new flash files added to server DataBase

*ATTENTION:  Above programs are only available as a part of Update 2018 for DiagProg4 Diagnostic tool for cars. These programs are not available for DiagProg3 tester.